Clean Rooms and Cleanroom Flooring


BIOQUELL is a BSI approved filtration, decontamination and contamination control equipment specialist.

The Microflow® Peroxide Class II Advanced Biological Safety Cabinet is designed for gassing with H2O2.

Fitted with an aerodynamic working aperture, BIOQUELL's Monair® Plus Fume Cupboard ensures high-performance containment and protection functionality.

BIOQUELL ZZone / Room / BuildingBio-decontamination:- VHP Technology- High Capacity- Parametric Control- Simple to use - Compatible with sensitive electronics

Clarus® hydrogen peroxide gas generators. Used to gas small and large enclosures providing safe and 'residue-free' decontamination.


Bolidt Synthetic Products & Systems is a Dutch company specialised in the production and installation of various synthetic flooring systems working on a worldwide basis.

Bolidt has gained almost 40 years of experience, always working in close contact with the end-customers, consultants and architects, taking note of their specific needs and requirements.

Bolidt is the name within this industry that extends from X-rays and blood transfusions to distribution: the pharmaceutical wholesaler.

In the world of research and development, the Bolidt R&D specialists have been the pioneers of the Bolidt floor.


DYNACO cleanroom doors are designed for interior pharmaceutical environments, in cleanroom class 10,000 to 100,000, providing an aesthetically pleasing appearance.

DYNACO superior quality high-speed roll-up doors will instantly re-insert them if accidently dislodged from the side frames, and be back up and running.

DYNACO cleanroom doors are ultra quiet, easy to clean and maintain pressure in critical environments.

DYNACO high-speed roll-up doors are designed to seal on all four sides, thus providing a barrier against dust, dirt and contaminants in special applications such as pharmaceuticals or food production.


Why settle for a packaged answer when Cleanpak® can provide a cost-effective, custom engineered solution for today’s most challenging applications.

FANWALL TECHNOLOGY® offers many advantages over traditional air handlers; smaller fan sections, greater flexibility in unit dimensions, higher efficiency and greater reliability through redundancy.

ETL-listed cleanroom recirculating air handlers designed with streamlined cabinet construction, recessed control panel and easy to remove fan/motor assembly.


Guardline are a market leader in the design, build, installation, validation and service of clean rooms.

We have a wide selection of sterile gloves ideal for pharmaceutical and medical plant use..

Ourt flexible clean wipes cater for every application.

Guardline manufactures non-woven fabric disposable and permanent medical clothing.

Our extremely wide choice of overshoes meets the demands of clean rooms, medical applications and general industry.


One of the main contributors to cross contamination is insufficiently cleaned equipment, Isocleanse provide the highest levels of cleanliness to the standards the customer requires.

Isolators provide a physical barrier between the operator and the product with the aim of minimising the risk of cross-contamination.

Isocleanse also specialise in cleaning hospitals: we can clean aseptic suites, clinical areas, laboratories, operating theatres, wards, and other areas that require specialised cleaning.


Köttermann looks after its customers through subsidiaries in 11 countries, which are part of the group as well as globally through numerous authorised partners.

Fume cupboards are the central element for the safe handling of hazardous substances within the laboratory environment and are an important factor for the risk reduction for laboratory staff.

Whatever your choice is, our laboratory furniture guarantees the highest degree of flexibility and enables you to work efficiently.

Safety is the first priority when working in any laboratory, laboratory staff deal on a daily basis with numerous dangerous, often hazardous substances.

Köttermann’s various supply service solutions make sure that you have everything to hand - exactly where you need it.


MAT’s cleanrooms, containment suites and clean air solutions fulfil all the requirements of MHRA, ACDP and cGMP.

MAT handles a variety of cleanroom, containment and clean air projects, from initial feasibility studies through design and installation to final handover.

Airlocks, interlocks and pass-through for isolator facilities.

MAT works to precise requirements to meet stringent standards.

MAT’s cleanroom, containment and clean air solutions provide environmentally comfortable areas for personnel working long hours.


Cleanroom tapes - wheel taping.

Mops - PolyGen with bucket in background.

Wipes - Silsat.

Detergents and cleaners - NovaHol.

Touch Free Dispenser - TFD.


Complete integrated facilities can be created using our products and design capabilities.

Special details produce a facility designed to meet precise requirements.

A range of walk-on ceilings provide access for the maintenance of services.

Bespoke designs can be produced to accommodate various process requirements.

With Imago you can have the building you want, where you want, when you want it.


The unique patented laboratory doors / hygienic doors and frame system incorporates many features to ensure suitability for clean and controlled environments.

The Standard PBSC Viewing Window or Vision Panel provides the clean area with a Fixing Free, Flush and Double Glazed unit made from Polished Stainless Steel.

Commonly referred to as clean room pass thru chamber, Cleanroom transfer hatch, trolley hatch, transfer tunnel, fire rated hatches, pass box, Stainless steel transfer hatch, resin hatch and PVC pass through chamber.

Constructed as either Phenolic Resin furniture or PVC furniture, the hygienic furniture is designed to suit the client’s requirements. The units have no visible fixings and are easy to clean, includes stepover bench, clean room shoe storage and cleanroom lockers, with other options available on request.

The electric lifting trolley is available in three standard sizes, the Ultra for 40kg max, the Midi 80kg max and the Maxi up to 300kg. A range of accessories are available with tilting, drum tipping, reel handling and bespoke attachments for specific functions available.


Bespoke glove boxes.

Alpha glove box.

Beta glove box.


Toepffer Lab Systems’ custom designed glove boxes are made from different materials like vinyl, acrylic, polycarbonate, aluminium or stainless-steel.

The flexible vinyl glove boxes are mostly used for microbiological, biochemical or biophysical applications.

Hypoxic glove boxes can be delivered in acrylic, aluminium or flexible vinyl versions.

Inert glove boxes are available as stainless-steel chambers or aluminium ones.

For many applications the user needs a small glove box, sometimes only for a short time test.


Newsletter Sign-Up
For all the latest news in the pharmaceutical industry, sign up here

Home
New On This Site
Products & Services
Company A-Z
Industry Projects
Features
White Papers
Jobs & Careers
Industry News
Gallery
Events & Exhibitions
Newsletter Archive
Newsletter Sign-Up
Advertise With Us
About Us
Client Area


RSS What is RSS
The website for the pharmaceutical industry