Hanwell - Dataloggers, Temperature and Humidity Loggers, Data Acquisition

Hanwell have integrated ten years of expertise in the design of data acquisition products, enabling users to seamlessly combine standalone dataloggers, radio telemetry and bus-based instrumentation. Products include wireless loggers and receivers (Radiologgers) and other dataloggers to monitor and transmit, for example, temperature and humidity data.

RADIOLOGGERS - RECEIVERS

cr-1 base station: The cr-1 base station receives and processes signals from Hanwell radio and wired sensors. These sensors communicate at regular short intervals with this base station, which logs and stores the data pending transfer to a PC for analysis and archival storage. The cr-1 also provides an interface for the MS1000 control system.

sr-1 base station: The Hanwell Radiolog sr-1, Smart Receiver, is a new radio solution for complex sites, taking advantage of the increasingly networked world to provide a flexible method of supplying live monitoring data across an organisation. Rather than bringing all radio data back to a single point in a building, the sr-1 allows them to be collected at several locations across a site, utilising LAN or WAN sockets and industry standard TCP/IP communication protocols.

RADIOLOGGERS - TRANSMITTERS

rl-8000 radiologger: The rl-8000 is a highly flexible solution to a wide variety of low-speed instrumentation problems. The unit offers eight configurable input channels and a variety of communication options including radio telemetry, TCP/IP and direct wired.

rl-2000 radiologger: Radiolog transmitters, such as the rl-2000, are designed to provide customised, adaptable control when used in combination with the cr-1 control system. This powerful combination makes it easy to expand a monitoring system for other purposes. Common applications include the duplication of voltage or current signals with no wiring between sensor and base station and the duplication of switch or relay positions in moving machinery, again with no wiring.

rl-100 temperature logger: The rl-100 (Radio Lab) telemetry unit is a small, economical temperature-only telemetry unit specifically designed for use in laboratories.

rl-1000 submersible temperature transmitter: The rl-1000 is a sensor for use in tough environments where there is a requirement for accurate and reliable temperature data without using wiring.

DATALOGGERS

Unlike most data loggers on the market, all Hanwell logging products have been designed with calibration very much in mind. The physical construction and software architecture together allow multi point calibration to very high precision.

Hornet: The Hornet temperature and humidity logger uses the same high quality components that are used on all Hanwell measuring instruments. The Hornet's temperature and humidity mapping abilities are especially useful in laboratories and in the pharmaceutical industry.

i-bug / v-bug: The i-bug and v-bug are palm sized standalone dataloggers that record current and voltage signals from industry-standard transducers, transmitters and sensors. Typical applications include pressure, pH / conductivity, gas monitoring and flow / level.

rh-t bug: The rh-t bug offers temperature and humidity mapping for laboratories, QC, HVAC, and storage and warehousing.

htl-1000: The htl-1000 high temperature submersible logger is designed for use in tough, high temperature environments where there is a requirement for accurate and reliable temperature data. Typical applications include incubators, fridges, freezers and water baths.