Teledyne Gas & Flame Detection

Subscribed

You have successfully submitted your enquiry. Someone from our company will respond ASAP

Data Loggers and Controllers for Detecting Gas in Pharmaceutical Production Plants

Teledyne Gas & Flame Detection provides gas monitoring solutions to increase workplace safety in pharmaceutical manufacturing plants.

 

Address
United States of America
Phone
Share

Teledyne Gas & Flame Detection provides gas monitoring solutions to increase workplace safety in pharmaceutical manufacturing plants.

The company helps medical companies avoid the build-up of toxic and inert gases on the production floor, in research and development (R&D) laboratories and plant utility rooms. Due to the use of nitrogen in many of these areas, the detection of oxygen depletion is particularly important.

Teledyne Gas & Flame Detection offers a wide range of gas identification products and configurations.

The GD10P uses a solid-state infrared source to monitor combustible gases.
Teledyne Gas & Flame Detection's MX43 emits alarms if gas levels fall outside a pre-set parameter range.
The OLCT 10N provides fast and accurate gas detection.
The PS200 Series is a compact and durable portable four-gas detector.

Gas detectors for pharmaceutical operations

Teledyne Gas & Flame Detection’s devices feature infrared automatic sensor recognition, including both catalytic and electrochemical detection. It provides customers with fast optical response times to identify the presence of gases such as ammonia, methane, chlorine, ethanol, Freon and sulphur dioxide.

The company’s gas detection technologies meet the requirements for a variety of applications, including protecting storage silos, vat cleaning and ensuring laboratory safety. Its high-quality data loggers monitor volatile organic compounds and combustible gases such as carbon dioxide (CO2), hydrogen and oxygen (O2).

Analogue and gas monitoring controllers for laboratories

The MX43 controller is Safety Integrity Level 1 (SIL-1) certified for gas detection. The device measures and controls gases using both digital and analogue channels that comprise up to 32 detectors.

The controller features two additional Metal Oxide Semiconductor Field Effect Transistor (MOSFET) outputs than standard systems for the creation of audible and visual alarms. It can programme up to five parameter ranges per detector, each featuring between one and three alarms.

The MX43 has an easy-to-read backlit display, simple embedded menus and an optional USB module that provides a recording capacity of more than two years.

Identification of toxic gases in medical manufacturing facilities

The OLCT 10N is a digital gas detector designed to identify and monitor oxygen and toxic gas levels in pharmaceutical production facilities.

Used in combination with the MX 43, the OLCT 10N provides a fast and accurate response. Up to 32 detectors can be connected on the same digital line or distributed across eight lines. Transmitter information is received by the controller in less than one second.

Operators use a magnetic wand to interact with the data logger, which can be calibrated without opening the enclosure. Information such as the span reserve is stored directly in the logger to increase data security.

The OLCT 10N is ingress protection (IP) 65 certified and recognised by ATEX for use in ATEX 2 and 22 zones. It is also resistant to water and dust.

Infrared gas detector for combustible gases

The GD10P infrared detector is used to monitor combustible gases in pharmaceutical manufacturing plants.

This low-maintenance unit has a solid-state infrared source that provides highly stable detection and a long service life.

The GD10P features heated optics to prevent condensation, a Highway Addressable Remote Transducer (HART) interface and fail-safe operation.

Portable device for detecting multiple gasses

Teledyne’s PS200 MultiGas Detector is a portable unit that is designed to detect oxygen, combustible gases, hydrogen, sulphide and carbon monoxide.

Calibrated using the PS200 Auto Bump & Calibration Station, the device’s easy-to-read display allows easy access to information such as gas concentrations, while its built-in sampling pump makes it suitable for use in confined spaces.

It is available in standalone, PC and ethernet versions, and features optional accessories such as a five-way charger and coloured rubber boots.

About Teledyne Gas & Flame Detection

Teledyne Gas & Flame Detection provides a comprehensive portfolio of reliable data logging and monitoring solutions for the pharmaceutical industry.

Teledyne Gas & Flame Detection offers customised gas detection systems to meet specific customer requirements.

White Papers

  • Gas and Flame Detection Products

    3M has more than 100 years of industry experience across a wide range of innovative gas and flame detection solutions. This adds significant adjacent strength to the personal safety division of 3M that features leading products in a wide range of personal protection equipment (PPE) markets, providing a broader array of safety products and solutions, enhancing our relevance to customers worldwide.

  • Portable Gas & Flame Detection

    Teledyne uses its global capability, manufacturing excellence and customer engineering to provide end-to-end gas and flame detection solutions for a wide range of hazards worldwide.

Press Releases

Products & services

  • PS200 MultiGas Detector

    The PS200 Series is a compact, yet rugged portable four gas detector engineered for the detection of oxygen, combustibles, hydrogen, sulphide and carbon monoxide.

  • GD10 Series

    The GD10 Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations.

  • MX43 Controller

    Our fixed and portable gas detectors are always application-driven and solution-oriented.

Address
Teledyne Gas & Flame Detection
United States of America